Some Things I’ve Learned in 30 Years of Business

This week marks thirty years since the incorporation of my business. I’m not a particularly nostalgic person so I hadn’t been thinking much about it. I just realized last week that April 1^st was coming up (the day my business was formally created) and, wow, has it really been 30 years?

That got me thinking about where I’ve been, where the industry has been, what I’ve learned and where things are going.

My business has had different iterations through the years. From d-i-y plumbing retail, new home construction, service, remodeling, HVAC, and my current passion and recurring theme from the very beginning — hydronic heating.

I’ve always had a desire to learn new things and stay on top of the latest industry trends, albeit with a healthy dose of skepticism toward flash-in-the-pan ideas. In some ways, keeping up with the technology is the easy part. It’s the other life lessons —learned through experience — that have really made things interesting.

I’ve seen some things I’d rather forget — like the squalor of a neglected elderly man’s home, or a basement, so full of bees, that the 100-watt light bulb at the bottom of the stairs looked like a night-light.

And I’ve been involved in many memorable projects — from landmark restorations to Homearama. From Habitat For Humanity to the Shepherd Home.

But people and relationships are what’s most rewarding about the last 30 years. I truly consider most of my clients to be friends. Friends that respect each other and are loyal to each other. Friends that want each other to succeed and live healthy, happy lives.

Thank you to all my friends. Thank you for allowing me to be part of your lives and welcoming me into your homes.

Hydronically yours,

Wayne

Punch Out the Holes

It was time for a new shower curtain in our bathroom. It’s a simple enough task. But as I started to hang the curtain on the first hook, I realized that the holes in the top of the curtain where the hooks are inserted are not punched out. Oh, they’re outlined and perforated, ready for punching — but they still need to be punched out.

I didn’t think much of it on the first hole, but by the time I was on the sixth hole I was starting to wonder, why wouldn’t the manufacturer finish punching out the holes? Are there really people who hang their curtain without using the holes? And would those people really object to the aesthetics of holes where they didn’t need them?

By the twelfth hole my arms were starting to ache and I was getting aggravated with the whole lack-of-hole thing. Why leave out the holes? Why make more work for your customers? Are you really saving that much in the manufacturing process by eliminating the hole-penetration step?

Maybe the curtain manufacturer cares. Maybe they don’t. Either way, I’ll probably never take the time to let them know. I’ll blow it off as not worth the effort.

It got me thinking about my clients. I wondered if maybe there are holes I’m not punching out in my process. Are there things I’m leaving undone that create little aggravations for you?

I try to cover all the bases. That’s why I perform heat loss calculations, and ask you how you use your heating system, and clean up after myself, show up on time, return your phone calls and emails, and do a multitude of other on- and off-the-job tasks intended to soften the impact of what I’m doing on your everyday life.

But I still wonder if I’m leaving some holes unpunched. Is there something I’m not doing, that despite my best efforts is even a small aggravation for you? Something that causes you inconvenience?

We all love to hear praise, and I’m no different. But without criticism how are we to improve? And I do want to improve.

So, please, tell me what aggravates you. I’ll listen. I promise. And then I’ll punch out the holes for you — whatever those are.

Hydronically yours,

Wayne

The Truth About Troubleshooting

-->

Most times, when things go wrong with your hydronic system (or any mechanical or electrical system) there’s a clear reason for the failure. Experience tells me where to look for the most obvious source of the problem in order to make a quick repair and get things up and running again.

But every once in a while a problem crops up that doesn’t lend itself to a quick diagnosis. Maybe it’s something I haven’t seen before or there are unique conditions affecting the equipment in unexpected ways.

I like to look at these situations as opportunities — to learn something new, to challenge my troubleshooting skills and to show you how committed I am to making things right. That’s not to say these opportunities are without their challenges.

It takes hard work, research and focus. Getting to the root cause and fixing the problem once and for all requires a complete understanding of what went wrong. And, more often than not, it takes patience. Patience on my part — and yours.

It’s relatively easy to throw a bunch of parts at a failed system and get a quick fix. But unless we take a systematic approach to troubleshooting, we’ll never know the true cause — and therefore won’t be sure it can’t happen again.

I’ve found the best way to get to the true cause is to make one change at a time and measure the effect of that change. That way I can be confident that the final fix will be permanent, because I’ve truly gotten to the root cause of the problem.

You play a big part in the troubleshooting process, too. Your feedback and observations of system performance are critical. So is your patience. It will likely take several visits and a fair amount of communication to get to the bottom of a stubborn issue. But together, we’ll get it done. And we’ll both be better off for having worked it through systematically.

Hydronically yours,

Wayne

An Ideal Heating/Cooling System for Your Small Addition

Last week I explained why the use of a ductless mini-split heat pump system as the sole source of heating and cooling is not the right application for the small (less than 1000 sq. ft.) addition. In order to properly size for the heating load on colder days, you’d be left with grossly oversized cooling capacity. And that will cause the heat pump to short-cycle when cooling on any day except for the very warmest. This short-cycling will result in less comfort, less efficiency, increased maintenance and shorter equipment life. Not good. After all, who wants to stress about their heating/cooling system.

You want to be comfortable all year long. If you want to expand your home with a small addition, I recommend ductless mini-split heat pumps for cooling in applications where the primary heat is supplied by another source — like radiant floor, finned-tube baseboard, radiant panel or hydro-air. That way I can size the cooling portion for ideal comfort and the heating portion of the heat pump can be used as a backup heat source if the main heat source is down for maintenance.

But now there’s an exciting new technology coming to the market. It combines the best of variable-speed compressor heat pump technology with hydronics to provide super high-efficiency performance with the awesome comfort of radiant heat and central cooling.

An air-to-water heat pump is the heart of this technology. During heating season it extracts heat from the outdoor air and transfers it to water using an indoor heat exchanger. In the cooling season, the process is reversed — indoor heat is transferred (via the same heat exchanger) to a refrigerant and expelled outdoors by the heat pump.

Since the heat pump has a maximum heating output temperature of approximately 120˚F, it’s a perfect match for low-temperature radiant — thin-slab, above-floor tube and plate, walls, ceilings, panel radiators and some types of finned-tube baseboard. This is the most comfortable heat around.

To cool the air, a pump circulates water (chilled by the heat pump) from the heat exchanger through a cooling coil located in an air handler. This distributes cooled and dehumidified air throughout your addition. If the design of the addition permits it, a standard air handler with the familiar ductwork can be used. But if equipment space is at a premium, a high-velocity mini-duct system with its 2” diameter ducts may be a better fit.

The efficiency of an air-to-water heat pump is rated in terms of its Coefficient of Performance (COP). COP is a ratio of the amount of heating (or cooling) produced to energy consumed. It’s not unusual for a variable-speed air-to-water heat pump to have a published COP of over 4.0 and an average COP of 2.7 to 3.0. In simple terms, for every one unit of energy consumed, the heat pump can produce almost three units (annual average) of heating or cooling. The only system more efficient than that is a geothermal system. (More on that comparison in future installments.)

Even though some of these heat pumps are advertised to operate in outdoor temperatures down to -4˚F, when the outdoor temperature drops to about 20˚F, the cost of energy input increases to the point where an alternate heat source is more efficient. A separate gas- or oil-fired boiler can provide a backup heat source for the coldest days as well as domestic hot water (DHW) production year-round. And if the main part of the house is hydronically heated, the air-to-water heat pump and the existing hydronic system are a match made in heaven!

But even if you need a backup/DHW boiler, the incredible efficiency of the air-to-water heat pump will offset the higher initial equipment cost with fuel savings in just a few years.

If there’s a small addition in your future, consider an air-to-water heat pump with radiant heat and chilled-water cooling as a renewable-energy alternative that pays for itself.

Heidronically yours,

Wayne

Ductless Mini-Split Heat Pumps and the Small Addition

The popularity of ductless mini-split heat pumps has grown tremendously in recent years. They’re a great way to add cooling to a hydronically heated home because they don’t need bulky ductwork. But like many new things, there’s a tendency to apply them to as many situations as possible, including some that they may not be well suited for. One such misapplication is as the sole heating and cooling source for a small addition.

Ductless mini-split heat pumps are usually an air-to-air heat pump — meaning it takes outside air and strips it of its heat value and transfers that heat to your home to provide space heating. For cooling, the cycle is reversed — it pulls the heat out of your house and expels it to the outdoors. You could think of a heat pump as an air conditioner that’s capable of working in reverse.

Heat pumps are nothing new, but the configuration of the ductless mini-split is. The condensing unit is located outdoors and a refrigeration lineset, small drain and wiring are run into your home through a 3˝ opening in an outside wall. They supply the indoor unit, which is usually mounted high on a wall and contains the blower and indoor controls. Ductless mini-splits are incredibly quiet (inside and out) and efficient.

I’m often asked to design a heating and cooling system for a small addition to an existing home (less than 1000 sq. ft). The first thing I look at is the capacity of the existing system to handle the addition’s extra heat and cooling load. More often than not, especially with forced air, the existing system can’t do the job. The system in a hydronically heated home can almost always handle the additional heating load but it obviously can’t provide cooling.

That usually leads to someone suggesting a ductless mini-split heat pump for heating and cooling the addition. It’s tempting, because it’s a relatively easy, quick and inexpensive installation. And here’s where the misapplication comes in. As an example, let’s apply a ductless mini-split heat pump to a typical 700 sq. ft. master bedroom, bath and laundry addition.

An addition like this would typically have about a 14,000 Btu/hr heat load on the coldest day of the year (considered 0˚F in the Rochester, NY area). It would also require just under 1 Ton (12,000 Btu/hr) of cooling on the warmest day of the year (considered 90˚F in this area). Both design loads would keep the indoor temperature at 70˚F.

Now, when sizing a heat pump, you size for the greatest load (heating or cooling) so you can be sure there’s enough capacity for both seasons. In our example case, as with most applications in this climate, the largest load is the heating load. So wouldn’t logic dictate that we’d need a heat pump rated for 14,000 Btu/hr? Not so fast.

We also need to consider the fact that as the outdoor temperature drops, so does the efficiency of the heat pump. In fact, even though some of the newer models are capable of providing heat down to an outdoor temperature of -4˚F, at those temperatures their heat output drops to near 50% of rated capacity. So now we realize that we need to DOUBLE the capacity of the heat pump to have any chance of maintaining our 70˚F indoor temperature on a 0˚F day.

That means we’re looking at installing a heat pump with a 28,000 Btu/hr minimum capacity, which actually works out fairly well, because heat pumps come in a 2-1/2-Ton size (30,000 Btu/hr). So now that we’ve decided that we need a 30,000 Btu/hr unit for heating, let’s see how that works for the cooling side.

Remember, the cooling load is 12,000 Btu/hr on the warmest days (90˚F). And there’s a 30,000 Btu/hr capacity. Simple math tells us that on even the warmest days, our heat pump is oversized (for cooling) by 250%. And, as you’ve heard me preach before, in cooling (and heating), bigger is not necessarily better.

Most of the better ductless mini-split heat pumps these days use inverter technology to modulate the compressor speed, which tailors the output to the load. With our example, the compressor would modulate down to 40% of capacity on the WARMEST day. That means that on a milder day it may need to be operating in the single-digit-capacity numbers. The problem arises when the compressor is only capable of modulating down to 30% of capacity, meaning that anything less than 75% of the maximum cooling load (in our example) will be asking the heat pump to work below its minimum capacity — which will be the bulk of the cooling season!

When a heat pump is asked to work in a range below its minimum capacity, it will short-cycle and, as a consequence, fail to properly dehumidify. We’ve discussed short-cycling and its consequences before — less comfort, less efficiency, increased maintenance and shorter equipment life.

For this example addition, the ductless mini-split “kind of” does the job. It can either do an acceptable job of heating with not-so-good cooling, or an awesome job of cooling with unacceptable heating performance.

So if a ductless mini-split isn’t the answer to heating and cooling your small addition, what is? Be sure to check next week’s Heidronics blog post for the answer.

Heidronically yours,

Wayne

When More Power Isn’t Always the Winner

-->

The Daytona 500 is all about speed and power and getting to the finish line first. Hydronics is basically the opposite — but you’d never know that from the way most hot water heating systems are installed these days.

Historically, North American hydronic designers and installers have specified and installed circulating pumps that pump more water and use more power than what is actually needed. It’s called “over-pumping.” And if a system underperforms, the first reaction of many technicians is to install a bigger, more powerful pump. But this almost never solves the problem.

It’s a chicken vs. egg thing. Installers either don’t have the knowledge or won’t take the time to calculate the pumping requirements for the system, and wholesalers don’t stock more than a few different pump models. I’ve heard installers justify their pump choice by the “bigger is better” mentality. And wholesalers have told me that they’d stock a wider variety of pumps but the installers aren’t asking for them. That’s a shame.

In hydronics, like stock car racing, the object is to go round and round until you cross the finish line and meet your goal. But unlike stock car racing, the winner in hydronics gets there with as little effort and speed as possible. The goal is delivering the right amount of heat from the boiler to the heat emitter (radiator, radiant floor panel or baseboard heater, for example). Pushing the water faster doesn’t make that happen any better. It just wastes energy!

Over-pumping can also create a condition known as velocity noise, which is caused by the water traveling too fast through the pipe and fittings. It can also cause erosion corrosion — a wearing away, or eroding, of the pipe wall due to the scouring action of high-velocity water flow.

But there’s hope. A new generation of circulators uses variable-speed technology and highly efficient electronically commutated (ECM) motors to vary their output to the specific needs of your system. If a zone valve closes, the pump slows down. If another opens up, the pump speeds up. Some are

Variable-speed ECM circulator

designed to operate on a pressure difference. Others operate on a temperature difference. But either type delivers just the flow necessary to heat the space, and either will consume much less electricity to accomplish the same results as compared to a bigger pump.

I’ve been using these variable-speed ECM pumps for several years now and have found them to be incredibly energy-efficient and versatile — especially for systems subject to changing flow-rate requirements. But they’re not the answer for a poorly designed system. While these pumps are capable of responding to a wider range of conditions, they still have their limitations. The application of solid design principles will determine the best application for these new-generation pumps.

You could compare great hydronic pumping to the tortoise and the hare. A bigger, faster pump will just wear out your system while a slower, steadier, variable-speed pump, like the tortoise, will win the race — every time.

Heidronically yours,

Wayne

How to Identify Your Hydronic System

Ciculator pumps.

There are good reasons to understand the basics of your hydronic heating system, even if it’s just knowing how to identify what type of system you have. It helps the service technician when you can tell him what type of service call he’s responding to and he can troubleshoot more effectively. It also helps you weed out the inexperienced service technician or contractor. I’ve even seen home inspection reports that went into great detail about a home’s hot water heating system that turned out to be steam. True!

Starting with the question, Is this steam or hot water?, let’s go down to the boiler room.

A hot water heating system usually works by pumping heated water through a system of pipes, to the radiators, and back to the boiler. A dead giveaway to the hot water system is the pump. There are a few old hot water systems out there that don’t use pumps, but by-and-large, most have a pump. And frankly, if you have a hot water system that’s old enough to be “gravity” operated (without a pump), you should be thinking more about identifying its replacement.

Steam boiler with gauge glass.

A steam system would rarely have a circulating pump. There are some steam systems that use the hot water below the boiler’s water line as a heat source for a domestic hot water circuit or small heating loop, but they’re fairly uncommon.

A steam boiler should always have a gauge glass on the side of the boiler. This allows you to see the water level in the boiler. A hot water boiler doesn’t need this because the whole system is (or should be) full of water.

Now let’s say you’ve straightened out your home inspector on the fact he’s actually looking at a steam boiler. But now he’s too intimidated to ask if it’s a one-pipe or two-pipe system. You’ll want to volunteer this information. We need to get out of the boiler room and head upstairs for this.

You can usually tell a one-pipe from a two-pipe steam system simply by looking at the radiator. One-pipe will have just one pipe connected to the radiator and two-pipe will have two. It’s that simple. But it’s an important distinction. The two systems operate very differently and require a different mindset for troubleshooting.

One-pipe steam radiator.

Another distinction between the one-pipe and two-pipe steam system is that the one-pipe should have an air vent on the side opposite the steam inlet. But you need to be careful with this one — I’ve seen some underperforming two-pipe systems “fixed” by adding a vent to the radiator. It’s a bad idea, but they’re out there.

Most (not all) two-pipe systems will also have a steam trap on the radiator outlet. This is the device that can fail and cause the inexperienced service technician to put an air vent on a two-pipe radiator!

Two-pipe steam radiator.

So there you have it. Now when you call for service, you can tell your service technician exactly what type of system you have and help them better diagnose your service problem. (Or impress your home inspector.)

Heidronically yours,

Wayne

It's a Numbers Game

A heat-loss calculation is where it all starts. It’s the basis for sizing any new or replacement system. It’s a roadmap to a well-designed, high-performing and comfortable heating system. And it’s not hard to do. It just takes some time and a little patience.

First, I measure each room ­— length, width and height. I also measure windows and doors and categorized them by construction type. Then I check the quantities and location of insulation. Usually I make a sketch to scale. For the average home, it takes about two hours to accomplish.

Next, I enter those measurements into a worksheet or use specialized software to produce a room-by-room and whole-house heat-loss calculation. The resulting numbers are the amount of heat lost by your house on the coldest days of the heating season.

These calculations tell me (or another heating designer) what size boiler or furnace is needed. It gives me the information I need to determine how much heating element or how many ducts are needed in each room — or how hot the water needs to be. Or what the flow rates need to be. And the pump sizes, pipe diameters, tubing spacing, panel size, and on and on and on.

Without a heat-loss calculation, it’s all guesswork. Luck. A wing and a prayer.

This is your heating system. The one you’ll be living with and fueling for the next 15, 20 — even 30 years. Ask for it. Demand it. Accept no shortcuts.

Heidronically yours,

Wayne

Get to know your steam boiler’s probe-type low-water cutoff.

--> -->

Last week I discussed how to check the mechanical low-water cutoff on your steam boiler. However, more and more new steam boilers are equipped with “probe-type” low-water cutoffs that use an entirely different mechanism to detect a low-water condition and shut down your burner before an unsafe condition occurs. (For more on that, see this post on the evolution of the low-water cutoff control.)

The typical probe-type low-water cutoff is threaded into a port on your steam boiler provided by the boiler manufacturer specifically for this purpose. It’s below the normal water level but just above the level of the bottom sight-glass port. This type of low-water cutoff operates by monitoring the electrical continuity of the boiler water. Simply put, when the probe is exposed to water, it allows the burner to operate. And when it’s exposed to air (as in a low-water condition) it does not.

McDonnell & Miller PSE-800

Some probe-type low-water cutoffs allow the burner to operate for a little bit after they sense a low-water condition — usually about 30 seconds. This is to prevent nuisance shutdowns due to temporary conditions, such as foaming or slow return of system condensate. A flashing light on the low-water cutoff control enclosure usually indicates this type of condition. If the probe senses water again within the 30-second window, the light will stop flashing and the burner continue firing without interruption.

Probe-type low-water cutoffs are either manually or automatically reset. Most residential steam boilers use automatic reset to let the boiler continue heating once the low-water condition is corrected — as when an automatic water feeder is used. A manual reset would require human intervention — a strategy that may not be in your best interest if the boiler were to shut down on low water when you’re away for a few days during the winter.

With either type, you can periodically check the device’s electronics by pressing and holding the test button while the burner is firing. A light will usually flash for a period of time and then the burner will shut down. Releasing the test button should start the burner and return the system to normal operation.

A probe-type low-water cutoff doesn’t require the same weekly maintenance as its mechanical cousin. But during the annual maintenance of your system, I’ll check your cutoff by lowering the water level to simulate an actual low-water condition. And every five years, I’ll remove the probe for cleaning and inspection. If your probe is older than 10 years, I should replace it for you.

With just a little attention, your probe-type low-water cutoff should provide years of reliable protection for your steam heating system.

Heidronically yours,

Wayne

How to Test Your Steam Boiler Mechanical Low-Water Cutoff

Probably one of the most common low-water cutoff controls used on residential steam boilers is the McDonnell & Miller Model 67. It’s a mechanical control that uses an internal float to monitor your boiler’s water level. A drop in water level lowers the float, activates a switch and shuts down the burner as a safety measure. Otherwise, without enough water, a boiler can dry-fire and create a dangerous condition. (See last week’s post for more on why we use low-water cutoffs.)

McDonnell & Miller # 67

All mechanical devices are subject to failure at some point. The low-water cutoff can accumulate rust and sludge that impedes the movement of the float. If too much debris accumulates and the float can’t drop during a low-water condition, the control can fail to operate when you need it most.

A simple weekly test you can do yourself can make a huge difference in the reliability of your low-water cutoff. Combined with a more thorough annual maintenance and scheduled replacement (every 10 years), you can be confident that your low-water cutoff will be ready when or if you need it.

Weekly maintenance involves “blowing down” or flushing your low-water cutoff by opening the lever-operated ball valve to flush out the sludge, rust or other debris.

Here’s how:

1.     You’ll want a 2 – 5 gallon bucket — preferably metal. The water you’ll be flushing is VERY HOT and can deform a plastic bucket.

2.     Verify the boiler water level is at its normal level. Adjust it if necessary by activating your water feeder or opening the manual fill valve.

3.     Turn up the thermostat so the boiler’s burner is firing during the test.

4.     Open the valve on the bottom of the low-water cutoff completely.

5.     Watch the water level as it drops in the gauge glass. (This is the glass tube on the side of your boiler that shows the water level.)

6.     As the water level drops to near the bottom of the gauge glass, the low-water cutoff should shut down the burner. (If it doesn’t, have it serviced immediately.)

7.     Close the valve and refill the boiler to its normal water level.

8.     The burner should relight.

9.     Reset the thermostat to its normal setting.

That’s all there is to it. Feel free to comment if you have any questions or would like to share your low-water cutoff experience. Good luck!

Hydronically yours,

Wayne

Your Low-Water Cutoff

Today’s boilers incorporate many controls to improve safety. And, arguably, the most important of those is the low-water cutoff.

In the late 1800s and early 1900s boiler explosions were not uncommon. Thousands died or were injured in the name of central heating. To be sure, there were many causes for these boiler incidents, but the most common was the low-water condition.

Boilers could lose their water through leaks or evaporation. When they did, the boiler metal would overheat. Then, either manually or through an automatic feeder, water would be added to the hot boiler. When this happened the water would immediately flash to steam. And as water turns to steam, its volume expands over 1600 times — which quickly over-pressurizes the boiler and results in a catastrophic failure.

In the early 1900s the issue of boilers losing water through leaks in their return piping was addressed by one of the largest insurance companies at the time. The Hartford Insurance Company had to pay many of the claims that resulted from these boiler explosions so they developed a piping scheme that kept water from escaping from the boiler in the event of a return-pipe leak. It became known within the industry as the Hartford Loop.

The Hartford Loop reduced boiler failures caused by return-pipe leaks, but it didn’t address other low-water situations such as a boiler crack, evaporation, or water-feeder failure. Boilers at the time needed human attention and intervention to maintain a safe water level. Even a short period of inattention could have disastrous consequences.

In 1926 McDonnell & Miller Co. introduced the first low-water cutoff. It was an automatic device that monitored the boiler’s water level and shut down the fuel supply before the water level dropped dangerously low. Combined with an automatic water feeder, the system keeps a boiler running safely with much less personal attention. It’s also saved countless lives.

Today, low-water cutoff controls are considered standard equipment on steam boilers and most hot-water boilers. They provide a level of safety and peace of mind that we’ve come to expect from our heating systems. But they still need some attention and a little routine maintenance to remain reliable safety devices.

In my next post, I’ll talk about things you can do to improve the safety and reliability of your low-water cutoff control.

Heidronically yours,

Wayne

Less is More

-->

Turn it down. Turn it way down.

I’m referring to the pressure setting on your steam system. The single easiest thing you can do to improve the performance, comfort and fuel economy of your steam heating system is to reduce the pressure. It should also be the first thing you do when things aren’t working right.

It’s tough to do. It seems counterintuitive. That back addition or attic bedroom isn’t getting enough heat, so it seems to make sense to turn up the pressure to force the steam into the far reaches of your system. But it seldom works. And what’s worse, it usually creates even more problems.

Most of the components in your steam system operate best within a range of pressures. Take main air vents, for instance. They come in lots of shapes and sizes AND pressure ranges. I was recently in a home with end-of-main vents that weren’t working properly. They seemed to vent OK at the beginning of the cycle, but appeared to stop working before the main was completely vented.

As it turns out, these particular main vents are designed to operate at less than 3 PSI. At higher pressures they close off tightly ­— rendering them essentially useless. A check of the pressure control had the system set at 7 PSI. So as the steam pressure rose inside the pipes, the vents worked until the pressure got to 3 PSI, then they’d stop venting. Since this was a one-pipe system, the radiator vents had to do double duty venting the rest of the main, all of the risers and the radiators.

A standard Honeywell Pressuretrol

This meant the radiators farthest from the boiler were not getting much heat. By the time the radiator vent in the attic allowed steam in, the radiator in the dining room (where the thermostat is located) had been full of steam and heating for some time.  It satisfied the thermostat and shut the boiler off just as the attic radiator was getting started.

When I turned the pressure down at the boiler, the main vents were able to completely vent the mains and allow the radiator vents to get back to work, venting only the risers and radiators. That’s when the attic radiator finally got some steam and heated the previously unusable attic space.

 

It can be worse on a two-pipe vapor system, as this usually has just one vent at the end of the dry return. If this single vent shuts off on pressure, everything stops heating. But the boiler keeps firing, trying to raise the pressure — wasting fuel.

A Honeywell Vaporstat

So what pressure is right for you? I haven’t met a residential space heating system yet that needed more than 2 PSI. And many need even less. In fact, on most of the replacement boilers I install, I routinely discard the factory pressure control that comes with the boiler and replace it with a Vaporstat. The factory-supplied device can only control the pressure down to 1PSI.  A Vaporstat regulates the pressure in OUNCES, which allows me to control the system at LESS than one pound of pressure — usually between 4 and 10 ounces. This can save a significant amount of fuel while improving comfort AND system performance.

Heidronically yours,

Wayne